Complete Guide for HP Officejet 4650 Troubleshooting

HP Officejet 4650 Troubleshooting is a well-ordered approach that can find out printer issues and find a solution to them automatically. If your HP Officejet 4650 printer stuck with any problems, try running the troubleshooting tool to resolve the issues. The tool analyses the printer issue in in-depth and examines the root cause for the HP Officejet 4650 Printer Issues. Finally, it deals with the issue and rectifies it.

Why Is My HP Officejet 4650 Printing Blank Pages?

  • Check and assure the input tray is loaded with adequate paper.
  • Install genuine HP ink cartridges into the slot.
  • Check the ink levels before you begin to print.
  • Check if the network connection is enabled and the printer is connected.
  • Update the outdated driver software to the most recent version.
  • Upgrade the firmware to latest version.
  • If the issue persists, reset the printer and allow it to remain idle for some time and then try to print.

Why Is My HP Officejet 4650 Won’t Scan?

  • Check and ensure that the power connection is active and stable.
  • Plug the power cable firmly into the rear printer and wall socket to start HP Officejet 4650 Troubleshooting.
  • Check if the document to be scanned is loaded correctly.
  • Align the thing that you need to scan in according to the engraved glass and guides.
  • Install the HP Print and Scan Doctor on your computer.
  • Open the software and click Fix Scanning HP Officejet 4650 Printer Issues.
  • Check if the issue resolves and try after upgrading the firmware to the latest version.
  • If the issue persists, reset the printer settings to default factory settings and then try to print.

Why Is My HP Officejet 4650 Offline?

  • Run HP Print and Scan Doctor after installing it on your computer, that is specially developed to resolve the printer offline issues.
  • Check if your printer and computer are connected to the same network connection.
  • Ensure the router connection is active.
  • Install the ink cartridges properly and check the ink levels on the cartridges.
  • Right-click on your printer name from the Devices menu under the Printer.
  • Set your printer as the default printer.
  • Troubleshoot the wireless network connection.
  • Right-click on your printer name and then click Printer Properties.
  • Click Ports > Add Port > Standard TCP/IP > New Port > Type in the IP Address of the printer.
  • Click Next and go with the instructions shown on the screen and complete the setup. This is to make a Secured Path for your HP printer, and it may allow the printer to be connected to the network.
  • If the problem retains, reset your printer’s printing mechanism to default.

Why My HP OJ 4650 Showing Error Code 0XB8000508?

  • Without turning off the HP Officejet 4650 printer, decouple the USB wire from the printer back.
  • Disengage the power wire from the rear of the printer and wait for few minutes.
  • Disengage the other end of the power wire from the wall socket and leave to the printer to remain idle for a few minutes.
  • Reconnect the power wire and turn on the printer, if it fails to turn on automatically.
  • Load sufficient paper into the input tray and install the ink cartridges properly.
  • Check the network connection and link your printer and computer to the network.
  • Check the ink levels on the ink cartridges.
  • Install the HP Print and Scan Doctor on your computer and check if the issue is resolved.
  • If the issue still there, service your printer.

Why Is My HP 4650 Cannot Update Firmware?

  • Turn on your HP Officejet 4650 printer.
  • Locate the printer update feature on your control panel. Menu names may differ by the printer.
  • Tap the HP ePrint button -> Settings or Setup -> Product Update or Check Product Updates.
  • If prompted to accept terms of service or sign up, go with the HP Officejet 4650 Troubleshooting instructions shown on your screen to activate Web Services and enable automatic updates.
  • If it does not make the printer to work, connect to the manufacturer site and search the firmware for your printer model.
  • Download and install the updated firmware on your computer.
  • Uninstall the obsolete firmware from your computer and delete the related files from the computer.
HP Officejet 4650 Troubleshooting